宝乐彩票计划软件

Contact Us | ChineseWelcome to Zhenjiang Changchen Immit Slurry Equipment Co., Ltd. official website!

Common problem

Grouting pump used for a long time, need to do what the basis of inspection?
Published Time:2016.09.07 Views No.

Because of the particularity of grouting pump working environment, use for a long time usually will appear this or that small problems, so it is used for a long time to do the corresponding check of the injection pump is very necessary, however, the general situation of our grouting pump should do what examination?
1, used for a long time, the line is easy to aging, so the need for the electrical control system of each line contact is firm, there is no leakage phenomenon to do a comprehensive inspection.
2, check the speed reducer in the lubricating oil is sufficient, so as to avoid the use of oil due to lack of oil and cause serious machine failure.
3, check the machine parts of the connection, fastening is firm and reliable, in order to prevent the components at the junction because of loose, resulting in low efficiency and security risks.
4. Start the machine in a short time, and listen to the sound of the machine so that you can master the rotation. (pay attention to whether the direction of movement is consistent with the direction of the arrow, and pay attention to avoiding the heating of the friction plate), is it good?.
5. Check whether the clamping pressure applied to the sealing plate is leaking, so as to ensure that the grouting pressure reaches the proper degree of pressure.
The above is the injection pump used for a long time should be checked, and they hope to help everyone, pump used for a long time do the inspection work should not be ignored, the inspection can not only ensure the machine performance, but also the need of safe production.

This paper is divided 1 Page
500万彩票 内蒙古快3走势图 内蒙古快3 内蒙古快3走势图 118彩票 内蒙古快3 106彩票 106彩票 内蒙古快3 500万彩票